LCF-2-2
LCF-2
LCF-2-3
LCF-2-1
넳 넲

Flame Treatment Equipment Flame Plasma Treatment Of Plastic Materials Corona Surface Treatment For Round Oval Square Bottles

Model No.︰ LCF-2
Brand Name︰LC
Country of Origin︰China
Order︰1 unit
Product Information
Pre-Press Equipment Flat and Curved Surface Flame Treatment Machine

Flame Treatment Machine for PP Bottle 
1. Surface pre-treatment of PE, PP, PET, bottle, hardware, plastic that ink better adhesion of printing or plating effect.
2. Micro motor imported from Japan, step-less speed timing mode is adequate for different workpiece requirements.
3. The machine is double sides equipped with baffle-boards to improve the heat efficiency.
4. Advanced gushing nozzle is designed to generate a good combustion result, it is a product that saves energy.
Speed of conveyor
1800~3000psc/hr
Conveyor size
2000*340mm
Outline dimension
2000*450*1250mm
Power Supply
AC220V/110V 
Diameter range of the bottle treated
10~24mm
Height range of the product treated
20~300mm
Height of Flame
250mm
Combustion-supporting gas
Compressed air 8kg/cm2
Treatment parts
Double flame treatment gun
Burning Gas
LPG gas

Machine Details

1) Connect the machine to the electrical source, compressed air and gas(the connector is at the machine frame bottom）
2) Press<4>to connect to electrical source, check<3> to see whether lights up or not.
3) Press<1>to start conveyor, press<8>to adjust conveyor speed.
4) Adjust<11>to tight the knob to adjust the flame nozzle to right height.
5) Adjust<7>container rotating speed. Container will fly away if speed too fast.
6) First turn off<9>gas valve which connect to the red tube, then press<6>gas starter to fill the flame nozzle with gas and Compressed air. Meanwhile, check<5>indicator to see whether lights up or not.
7) Undraw<13>the flame baffler, turn on<9>again, then adjust <10>compressed air valve which connect to the blue tube, adjust the compressed air current to the minimum, then ignite the flame nozzle near<12>
8) After igniting, turn<9>gas valve and <10>compressed air valve to adjust the flame to right condition. Then you can begin the flame treatment.
9) If any accident happen during flame treatment, pls press<1> to stop the machine.
Printing Sample